-
Critical Orifices (Sonic Orifices) Glass, Quartz, &
Metal Orifices
Dilution Probe Applications
-
Critical Orifice -- P/N CO-STK1B25-XXXML:
Material
Quartz | Pre-filter
N/A | Max. Temp.
1000°F (540°C) *limited by the seal material (typ.
o-rings).
Description: This Series of critical orifice ("sonic
orifice" or "quartz orifice") is our smallest
orifice type produced by ASI, having a 3mm OD!! This Series
does not include a pre-filter.
Application:
Used in special applications for precise flow metering
and also in ex-situ dilution probe applications. *The Maximum
Temperature is shown as "1000°F
(540°C)" ... please know that the material
of the connective fittings as selected by the customer will,
in most cases, decrease the maximum temperature allowed!!
Basic Dimensions: 3mm OD x 1mm ID x 25mm Length.
Flow rate to be specified at time of order. Replace "XXX"
in Part Number to specify nominal flow (e.g., CO-STK1B25-050ML
= Nom. 50ml/min critical orifice). Special flow rates and
lengths are available upon request.
Critical Orifice -- P/N CO-STK6-XXXML:
Material
Quartz | Pre-filter
N/A | Max. Temp.
1000°F (540°C)
*limited by the seal material.
Description:
This style of critical orifice ("sonic orifice"
... "quartz orifice") is the newest addition to
our critical orifice product line. Developed for special applications
and is about as simple as it gets.
Application:
This Series was originally developed by
ASI for integration into a gas analyzer for an OEM customer,
for process monitoring applications. Having such a simple
and bare-bones design allows for the end-user or integrator
to install this orifice type into a very small space, and
always allows the flexibility to use various types of in-line
pre-filter materials and sizes as needed. This Series does
not include a pre-filter, contact ASI for optional in-line
filters or suggestions.
*The Maximum Temperature is shown as "1000°F
(540°C)" ... please know that this is for the orifice
material only. The material of the connective fittings as
selected by the customer will, in most cases, decrease the
maximum temperature allowed!!
Basic Dimensions: 44mm LONG x 6mm OD x 1.5mm WALL.
Standard and Special Fittings sold separately.
Flow
rate to be specified at time of order. Replace "XXX"
in Part Number to specify nominal flow (e.g., CO-STK6-050ML
= Nom. 50ml/min critical orifice). Special flow rates and
lengths are available upon request.
Picture below shows the orifice stem with graphite
ferrule and 1/4" Swagelok® tube nut (one example
of connection)
Previous | Next
Click
Here
to view the ASI Critical Orifice full brochure in printer
friendly PDF format.
|