- Spare Parts
EPM OOS Diluting Sampler (cont.)
-
In-line Filter Assembly -- P/N 5000.167:
Material
Stainless Steel | Micron Size
60µ
Description: For use with Dilution Air line of the
out-of-stack (and in-situ) diluting sample probes. Complete
with 60µ filter cartridge. End connections are both
for 1/4" OD tubes.
Replacement Filter Cartridge -- 5000.183:
Material
Stainless Steel | Micron Size
60µ
Description: Replacement cartridge for in-line filter,
used with Dilution Air line of the out-of-stack (and in-situ)
diluting sample probes.
Poppet Check Valve -- 5000.166:
Material
Stainless Steel | Cracking Pressure
5psi
Description: For use with calibration line of out-of-stack
diluting sample probes and inertial filtered out-of-stack
diluting sample probes. End connections are both for 1/4"
OD tubes.
Graphite Ferrules -- P/N GS-GFER.25:
ID
1/4" | Qty.
10pc. Pak
Description: For use with the standard glass critical
orifice. Provides leak-tight seal between critical orifice
and front of in-situ (and standard out-of-stack) diluting
sample probes.
Pure Quartz Wool -- P/N FM-QWOOL-2M-XXG:
Micron Size
2µ/Ultra-fine | Qty.
10g/50g/100g Bags
Description: For fine-filter replacement in the glass
critical orifice, or in Monel critical orifice pre-filter.
Note: approximately .7 to 1g of quartz wool is used to for
refilling the above noted parts. Replace "XX" in
Part Number to specify quantity in grams (e.g., FM-QWOOL-2M-10G
= 10 gram bag of quartz wool).
Nickel Anti-Seize Compound -- P/N GRS-NAS-01C:
Temperature Rating
Up to 2400°F (1315°C) |
Qty.
1/2 OZ.
Description: For use as lubricant that protects threaded
parts from seizing and galling. Recommended for all of the
threaded parts of your diluting sampler.
Looking for Critical Orifices?
Click
Here.
For
Replacement parts specific to the In-situ
Diluting Sampler,
Click
Here.
Can't find the part your looking for?
Contact
Us.
Previous
|